Clark TK80 Tank Controller

$239.99$329.99

Clear
SKU: TK80MFU Categories: , , ,

Description

The Clark TK80 series takes you to the next level in tank controllers. Loaded with features in various configurations and prices.

  • Ultrasonic ESC*3 for two track motor and turret rotation.
  • Ultra Low turn-on resistance FET for track motor ESC
  • Select a sound pack that is preloaded with the option to change the sound pack
  • A TK Programmer is required to change the sound pack
    • Please note this is sold separately
  • S BUS configuration for a quick and easy configuration
    • Only 1 wire to the receiver that offers driving and function control
    • Operation vs conventional radios is simple and similar to the HL and Taigen MFU/transmitter controls
    • Please note a compatible radio is required and the recommended FlySky FS-i6S can be purchased here
    • Please review the SBUS board radio setup guide here if you are unsure if your radio is compatible, as the configuration settings for a non-FlySky i6S can be compared against those in the user guide.
    • The end user is responsible for identification of radio compatibility when not using a FlySky i6S.
    • If an additional receiver is needed only, the FlySky FS-iA6B receiver can be purchased here
  • Ultrasonic ESC
  • Remote Volume Control
  • Gun barrel stabilizer (GBS) option available on the TK80 Programmable variant
  • Neutral gear
  • MG2 for a 2nd MG sound and light effect option
    • Recoil solenoid supported on MG2
  • Rotating lights, tail lights and left/right blinker lights support
  • Supports Tamiya IR battle format
  • On-board Class D dual-channel (15W each) audio amplifier with external audio input channel
  • 22 KHz  8 bit sound, up to 5 channels of sound FX, and 15 watt output
  • V2 Engine Sound Simulation
    • Multi-sample-set, frequency shift and level, and revving
  • Smoker driver is V2 and proportional to engine RPM and load
  • Wide operating voltage rage, from 7.2 to 12V, support 3S Li-Po battery
  • Customization of some functions using IR configuration remote
    • Please note this is sold separately and is available here
  • Small footprint at only 92mm X 52.3mm X 20mm

For full specifications, details, and programming options. Please visit the Clark TK80 page for full listing of features and specifications. To order the non-sound programmable variant of the board, please contact us.

NOTICE – THIS IS NOT 100% PLUG AND PLAY BOARD. SIMPLE CHANGES REQUIRED FOR FULL OPTIONS

Compatibility Disclaimer

  • Clark Model compatibility tests are based on Mato, Tamiya, and Heng Long tanks. Accessories in the tank not listed here are not guaranteed.
  • Clark Model will accept a customer sending accessories in the tank not listed here to test and fine tune if any problem occurred.

Additional information

Weight 80 g
Dimensions 92 × 52.3 × 20 mm
RC Protocol

Conventional PWM, S Bus

GBS

Yes, No

Sound Pack

Centurion, Challenger II, Leopard 2, M1 Abrams, Elefant, Jagdpanther, Jagdtiger, JS2/KV, King Tiger, M4 with Ford GAA V8, M4 with Continental R975-C4, M41, Panther, Panzer IV/Panzer III/Stug, T-34, T-90, Tiger I, Sturmtiger, T-55, Panzer 38, M26 Pershing, Hetzer, Wirbelwind

You may also like…